Bradford White®

Bradford White® Defender Safety System® M-I-5036FBN Gas Water Heater, 40000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Atmospheric Vent, 42 gph at 90 deg F Recovery

896934 MFG #: M-I-5036FBN
$2,992.50 / ea
Bradford White® Defender Safety System® M-I-5036FBN Gas Water Heater, 40000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Atmospheric Vent, 42 gph at 90 deg F Recovery
  • Dimensions: 59-5/8 in H
  • Energy Factor: 0.78
  • Fuel Type: Natural Gas
  • Gas Connection: 1/2
  • Heating Capacity: 40000
  • Ignition Type: Piezo
  • Pressure Rating: 150
  • Recovery Rate: 42 gph at 90 deg F
  • Tank Capacity: 50
  • Ultra Low NOx: No
  • Vent Size: 3 x 4
  • Vent Type: Atmospheric
  • Water Connection: 3/4 in NPT

Bradford White® Defender Safety System® Gas Water Heater, 40000 Btu/hr Heating, Natural Gas Fuel, 1/2 in Gas Connection, 50 gal Tank, Piezo Ignition, Atmospheric Vent, 3 x 4 in Vent, 42 gph at 90 deg F Recovery Rate, 0.78 Energy Factor, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 59-5/8 in H Dimensions

These water heaters utilize a draft diverter and are atmospherically vented with capacities ranging from 29 to 60 gallons and inputs ranging from 30000 to 50000 Btu/hr These models are perfect for many standard water heating applications.

QTY
Add to List
  • Features
  • Bradford White® ICON System™ - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
  • Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
  • Pilot on indication - Flashing green LED provides positive indication that pilot is on
  • Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Advanced ScreenLok® technology flame arrester design - Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
  • Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
  • Maintenance free - No regular cleaning of air inlet openings or flame arrester is required under normal conditions
  • Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory installed Hydrojet® total performance system - Cold water inlet sediment reducing device helps prevent sediment build up in tank, increases first hour delivery of hot water while minimizing temperature build up in tank
  • Vitraglas® lining - Bradford White® tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
  • 1 in Non-CFC foam insulation - Covers the sides and top of tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity
  • Pedestal base
  • Water connections - 3/4 in NPT factory installed true dielectric fittings
  • Factory installed heat traps
  • Protective magnesium anode rod
  • 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter
  • Low restriction brass drain valve - Durable tamper proof design
  • Standard/Approvals: ama Certified|ANSI Z21.10.1|ASHRAE 90.1b|CEC Listed|CSA International (Formerly AGA/CGA)|Energy Saver® Certified|NAECA Compliant
  • INCLUDES: Temperature and Pressure Relief Valve
  • WARRANTY: 6 or 10 Years Limited Tank and Component Parts