Bradford White®

Bradford White® RG240T6X Gas Water Heater, 36000 Btu/hr Heating, 40 gal Tank, Liquid Propane Fuel, Atmospheric Vent, 34 gph at 90 deg F Recovery, Ultra Low NOx: No

1241438 MFG #: RG240T6X
$1,625.00 / ea
Bradford White® RG240T6X Gas Water Heater, 36000 Btu/hr Heating, 40 gal Tank, Liquid Propane Fuel, Atmospheric Vent, 34 gph at 90 deg F Recovery, Ultra Low NOx: No
  • Dimensions: 20 in Dia x 23-1/2 in D x 60-5/16 in H
  • Domestic/Import: Domestic
  • Energy Factor: 0.64
  • Fuel Type: Liquid Propane
  • Gas Connection: 1/2
  • Heating Capacity: 36000
  • Ignition Type: Piezo
  • Pressure Rating: 150
  • Recovery Rate: 43
  • Tank Capacity: 40
  • Ultra Low NOx: No
  • Vent Size: 3 x 4
  • Vent Type: Atmospheric
  • Water Connection: 3/4 in NPT

Bradford White® Gas Water Heater, 36000 Btu/hr Heating, Liquid Propane, 1/2 in Gas Connection, 40 gal Tank, Piezo Ignition, Atmospheric Vent, 3 x 4 in Vent, 34 gph at 90 deg F Recovery, Energy Factor: 0.64, 3/4 in NPT Water Connection, 150 psi, Ultra Low Nox: No, 23-1/2 in D x 60-5/16 in H

Bradford White® Defender System Atmospheric Vent water heaters utilize a draft diverter and are atmospherically vented with capacities ranging from 30 to 50 gallons and inputs ranging from 30000 to 50000 Btu/hr Defender Atmospheric Vent models are perfect for many standard water heating applications.

QTY
Add to List
  • Features
  • Bradford White® ICON System™ - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
  • Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials
  • Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
  • Pilot on indication - flashing green led provides positive indication that pilot is on
  • Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Advanced ScreenLok® technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
  • Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
  • Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
  • Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory installed Hydrojet® total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank
  • Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
  • Pedestal base
  • Water connections - 3/4 in NPT factory installed true dielectric fittings
  • Factory installed heat traps
  • Protective magnesium anode rod
  • 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter
  • Low restriction brass drain valve - Durable tamper proof design
  • Standard/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant
  • INCLUDES: Temperature and Pressure Relief Valve
  • WARRANTY: 6 Years Limited Tank and Component Parts