Bradford White®

Bradford White® ElectriFLEX LD™ LE230S3-1NLWW Light Duty Upright Electric Water Heater, 30 gal Tank, 4500 W, 208 VAC, 1 ph, Tall or Short: Short

1319278 MFG #: LE230S3-1NLWW
$0.00 / ea
Bradford White® ElectriFLEX LD™ LE230S3-1NLWW Light Duty Upright Electric Water Heater, 30 gal Tank, 4500 W, 208 VAC, 1 ph, Tall or Short: Short
  • ASME Yes/No: No
  • Dimensions: 18 in Dia x 48-1/8 in H
  • Heating Element: Screw-In Copper
  • Material: Steel
  • Phase: 1
  • Power Rating: 4500
  • Pressure Rating: 150
  • Recovery Rate: 18 gph at 100 deg F Rise
  • Series: LE230S3-1
  • Tall or Short: Short
  • Tank Capacity: 30
  • Type: Light Duty Upright
  • Voltage Rating: 208
  • Water Connection: 3/4 in NPT

Bradford White® ElectriFLEX LD™ Electric Water Heater, Light Duty Upright, Series: LE230S3-1, 30 gal Tank, 208 VAC, 4500 W, 1 ph, 3/4 in NPT Water Connection, Screw-In Copper Heating Element, 18 gph at 100 deg F Rise Recovery, 150 psi, Tall or Short: Short, ASME Yes/No: No, Steel, 18 in Dia x 48-1/8 in H

Light Duty upright models, with available capacities from 30 to 119 gal, are the perfect choice for many moderate commercial applications and are field convertible for various wiring configurations.

QTY
Add to List
  • Features
  • Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
  • Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water
  • Factory installed Hydrojet® total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
  • Vitraglas® lining - Bradford White® tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss
  • Results in less energy consumption, improved operation efficiencies and jacket rigidity
  • Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation
  • Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
  • Protective magnesium rod - Provides added protection against corrosion for long trouble free service
  • Steel tank - Heavy gauge steel automatically formed, rolled and welded
  • Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field
  • Copper screw type immersion element
  • Standard/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, CSAE Certified, NSF 372, UL 174
  • INCLUDES: Temperature and Pressure Relief Valve
  • WARRANTY: 3/5 Years Limited