Apollo™

Apollo™ Apollo™ Apollo International™ LD-141-05-B-E-1-1-A LD141 Resilient Seated Lug Style Butterfly Valve, 5 in Nominal, Flanged End Style, 125/150 lb, Ductile Iron Body, EPDM Softgoods

1374682 MFG #: LD14105BE11A
$431.52 / ea
Apollo™ Apollo™ Apollo International™ LD-141-05-B-E-1-1-A LD141 Resilient Seated Lug Style Butterfly Valve, 5 in Nominal, Flanged End Style, 125/150 lb, Ductile Iron Body, EPDM Softgoods
  • Actuator Type: 10-Position Handle
  • Body Material: Ductile Iron
  • End Style: Flanged
  • Nominal Size: 5
  • Pressure Class: 125/150
  • Series: LD141
  • Softgoods Material: EPDM
  • Temperature Rating: -20 to 250 deg F Intermittent/225 deg F Continuous
  • Top to Inlet Center: 8.38
  • Type: Resilient Seated Lug Style

Apollo™ Apollo™ Apollo International™ Butterfly Valve, Resilient Seated Lug Style, Series: LD141, 5 in Nominal, Flanged End Style, 125/150 lb Pressure Class, -20 to 250 deg F Intermittent/225 deg F Continuous, 10-Position Handle Actuator

Apollo International™ LD141 series ductile iron butterfly valves are ideal for use in industrial and commercial/HVAC/mechanical applications. The LD141 series is a companion lug style.

QTY
Add to List
  • Features
  • Videos
  • Compatible with ANSI 125 lb and 150 lb flanges
  • ISO 5211 top plate allows choice of Apollo™ pneumatic actuators and gear operators
  • LD141 series Suitable for end of line service (bidirectional dead end service) to rated pressure (2 to 24 in)
  • 3 to 24 in meet performance requirements of AWWA C-504
  • The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average
  • ASTM A276 type 416 stainless steel standard shaft
  • Buna-N stem seal and glass reinforced epoxy resin bushing
  • Black EPDM seat
  • Valves are full lug with tapped lugs, to ANSI 125/150 drilling
  • The face-to-face dimensions were designed to comply with MSS SP-67 and API 609
  • Through shaft assures positive disc positioning and dependable performance
  • Weather seal shaft equipped with weather seal to prevent external media from entering the shaft bore
  • Square shaft-to-disc connection provides a robust shaft-to-disc connection without pins or bolts
  • Three bushings supports shaft at three locations to enhance shaft alignment and absorb actuator side thrusts
  • Factory tested to 110% of full rated pressure in both directions before shipping
  • Profiled disc design precision machined disc edge creates Bubble tight shut-off, primary seal
  • Shaft seal the shaft Dia is greater than the Dia of the seat's shaft hole creating a robust shaft seal
  • All valves are 100% factory tested before shipping
  • Standard/Approvals: ANSI Specified|API 609|ASTM A536 Body|AWWA C-504|CRN OC/2102CL|Federal Public Law 111-380 ANSI 3rd Party Approved|MSS SP67-2002a|NSF/ANSI 372 Lead Free|NSF/ANSI 61