WATTS® 0009392 LF25AUB-Z3 Pressure Reducing Valve, 1-1/4 in, FNPT Union x FNPT, 25 to 75 psi, Copper Silicon Alloy Body
- Body Material: Cast Copper Silicon Alloy
- Dimensions: 8-1/4 in L x 3-5/8 in W x 9 in H
- Domestic/Import: Domestic
- End Style: FNPT Union x FNPT
- Media: Water
- Nominal Size: 1-1/4
- Pressure Range: 25 to 75
- Series: LF25AUB-Z3
- Softgoods Material: Stainless Steel
- Temperature Rating: 33 to 160
WATTS® Pressure Reducing Valve, Series: LF25AUB-Z3, 1-1/4 in Nominal Size, FNPT Union x FNPT, 25 to 75 psi, 33 to 160 deg F, Media: Water, Copper Silicon Alloy Body, Stainless Steel, 8-1/4 in L x 3-5/8 in W x 9 in H
Series LF25AUB-Z3 Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a Lead Free* copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The Series LF25AUB-Z3 is available with a variety of end connections including: threaded, solder, PEX, quick-connect and CPVC with both union and double union connections. Series LF25AUB-Z3 has an adjustable pressure range and is serviceable in-line. Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting: 50psi (344kPa).
- Features
- Standard construction includes Z3 sealed spring cage and stainless steel corrosion resistant adjusting cage screws for accessible outdoor or pit installations
- Integral stainless steel strainer
- Replaceable seat module
- Lead free cast copper silicon alloy body construction
- Serviceable in line
- Bypass feature controls thermal expansion pressure
- High temperature resistant reinforced diaphragm for hot water
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
- The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150psi (10.3 bar)
- 50 psi standard reduced pressure setting
- Reinforced EPDM with PTFE wetted surface diaphragm
- The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150psi
- Standard/Approvals: ANSI A112.26.2, ASSE 1003, CSA B356,IAPMO Listed, Southern Standard Plumbing Code
- INCLUDES: Z3 Sealed Spring Cage and Stainless Steel Corrosion-Resistant Adjusting and Cage Screws
- WARRANTY: Limited