Sloan®

Sloan® Royal® 3919745 ROYAL BPW 1000 Single Flush Bedpan Washer Manual Exposed Flushometer, 6.5 gpf, 1 in IPS Inlet, 1-1/2 in Spud, Polished Chrome

285019 MFG #: 3919745
$1,207.73 / ea
Sloan® Royal® 3919745 ROYAL BPW 1000 Single Flush Bedpan Washer Manual Exposed Flushometer, 6.5 gpf, 1 in IPS Inlet, 1-1/2 in Spud, Polished Chrome
  • Connection Location: Top Spud
  • Finish/Color: Polished Chrome
  • Fixture Type: Water Closet
  • Flush Rate: 6.5
  • Inlet Size: 1 in IPS
  • Material: Semi-Red Brass
  • Pressure Rating: 15 to 80
  • Rough-In Size: 34-3/8
  • Series: BPW 1000
  • Spud Coupling: 1-1/2
  • Type: Single-Flush
  • Valve Design: Diaphragm
  • Handle Type: Non-Hold Open Oscillating

Sloan® Royal® Manual Exposed Flushometer, Single Flush Bedpan Washer, Series: ROYAL BPW 1000, Water Closet Fixture, 6.5 gpf Flush, 1 in IPS Inlet, 1-1/2 in Spud Coupling, Diaphragm, Connection Location: Top Spud, Non-Hold Open Oscillating Handle, Semi-Red Brass, Polished Chrome

Slimline® Bedpan Washer Water Closet Flushometer, for floor mounted or wall hung top spud bowls.

QTY
Add to List
  • Features
  • Stop seat and vacuum breaker molded from PERMEX® rubber compound for chloramine resistance
  • Spud coupling and flange for 1-1/2 in top spud
  • 1 in IPS screwdriver Bak-Chek® angle stop with Free spinning, vandal resistant stop cap
  • High back pressure vacuum breaker flush connection with one-piece bottom hex coupling nut
  • High chloramine resistant PERMEX® synthetic rubber diaphragm with dual filtered fixed by-pass
  • Metal oscillating non-hold-open handle with triple seal handle packing
  • Solid one-piece body construction
  • Solid brass spray arm
  • Counter balanced pivot assembly and diverter valve wall support
  • Valve body, cover, tailpiece and control stop shall be in conformance with ASTM alloy classification for semi-red bras
  • Bedpan washer specialty
  • Less supply stop ground joint stop
  • ROYAL BPW 1000-6.5
  • Standard/Approvals: ADA Compliant|BAA Compliant|UPC Listed|Valve Shall be in Compliance with the Applicable Sections of ASSE 1037|ANSI/ASME A112.19.2