Sloan®

Sloan® Royal® 3010528 ROYAL 117 Single Flush Manual Exposed Flushometer, 6.5 gpf, 1 in IPS Inlet, 1-1/2 in Spud, Polished Chrome, Domestic

17847 MFG #: 3010528
$458.55 / ea
Sloan® Royal® 3010528 ROYAL 117 Single Flush Manual Exposed Flushometer, 6.5 gpf, 1 in IPS Inlet, 1-1/2 in Spud, Polished Chrome, Domestic
  • Connection Location: Top Spud
  • Finish/Color: Polished Chrome
  • Fixture Type: Service Sink
  • Flush Rate: 6.5
  • Inlet Size: 1 in IPS
  • Material: Semi-Red Brass
  • Pressure Rating: 15 to 80
  • Rough-In Size: 24
  • Series: 117
  • Spud Coupling: 1-1/2
  • Type: Single-Flush
  • Valve Design: Diaphragm
  • Handle Type: Non-Hold Open Oscillating

Sloan® Royal® Manual Exposed Flushometer, Single Flush, Series: ROYAL 117, Service Sink Fixture, 6.5 gpf Flush, 1 in IPS Inlet, 1-1/2 in Spud Coupling, 24 in Rough-In, Diaphragm, Connection Location: Top Spud, Non-Hold Open Oscillating Handle, Semi-Red Brass, Polished Chrome, Domestic

Exposed Service Sink Flushometer, for use with top spud Service Sinks.

QTY
Add to List
  • Features
  • ADA compliant metal oscillating non-hold-open handle with triple seal handle packing
  • 1 in IPS screwdriver Bak-Chek® angle stop
  • Free spinning, vandal resistant stop cap
  • Adjustable tailpiece
  • High back pressure vacuum breaker flush connection with one-piece bottom hex coupling nut
  • Spud coupling and flange for 1-1/2 in top spud
  • Sweat solder adapter with cover tube and cast set screw wall flange
  • High copper, low zinc brass castings for dezincification resistance
  • Non-hold-open handle, fixed metering by-pass and no external volume adjustment to ensure water conservation
  • Flush accuracy controlled by CID™ technology
  • Diaphragm, handle packing, stop seat and vacuum breaker to be molded from PERMEX® rubber compound for chloramine resistance
  • Valve body, cover, tailpiece and control stop shall be in conformance with ASTM alloy classification for semi-red bras
  • Handle on front of valve
  • ROYAL 117 H
  • Standard/Approvals: ADA Compliant, BAA Compliant, Valve Shall be in Compliance with the Applicable Sections of ASSE 1037, ANSI/ASME A112.19.2